Clear diagnosis before gutter repair begins
Experienced fault finding
We distinguish failed parts from blockages and poor gutter alignment.
Practical repair options
We reseal, secure, realign or replace components where appropriate.
Honest condition advice
We explain when wider deterioration affects the value of a small repair.
Find the true cause of overflow or leakage
Water spilling from a gutter may come from a failed joint, loose bracket, sagging run or damaged outlet. A blockage or poor alignment can create similar symptoms, so replacing the most visible part isn't always the right answer. We inspect the likely failure point and consider how water should move along the system. Building height, gutter material, access and the extent of deterioration all affect the available repair. Our 40 years of roofing and gutter experience supports practical fault finding for leaking gutter repair in London.


Repair the fault rather than mask the symptom
Depending on what we find, work may include resecuring fittings, correcting alignment, renewing a failed seal or replacing a damaged component. We explain when debris must be cleared before the repair can be assessed properly. Some ageing systems may have wider deterioration that makes a small isolated repair less useful, and we'll make that clear rather than promising an unsuitable result. Safe access remains part of the decision, especially on high or restricted elevations.
Frequently asked questions
Why is the gutter leaking only during heavy rain?
Heavy rain can expose restricted outlets, poor falls, sagging runs or joints that cope badly with greater water flow. We inspect the route of the water and check for both blockage and component faults.
Can a leaking joint always be resealed?
Not always. The joint and surrounding gutter need to be in suitable condition. Distortion, cracking, poor alignment or wider deterioration may mean a component needs replacing instead of simply renewing the seal.
Should gutters be cleared before a repair?
Clearance may be needed where debris hides the fault or causes the overflow. We assess whether the problem comes from a blockage, damaged fitting, alignment issue or a combination of these factors.
